Hayward W3SP0591HSL100 Pool Light, Hayward Astrolite IIIncandescent

Switched: Lights Out of Sync Lights can fall out of synchronization due to power outages, brownouts, repeated toggling, voltage drop, or even due to overloading a transformer. Initiate the light resync process Step 2A Verify lights are in the same mode Step 2B Initiate the light resync process, either manually or through the controller (pg. 7-9).. For light synchronization, all lights must be wired to the same switch. Once installed, all lights should be automatically synchronized, however, if they get out of sync, they can be re-synchronized easily. To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on.

Table of Contents. 1 Key Takeaways; 2 Understanding Hayward Pool Lights. 2.1 Types of Hayward Pool Lights; 3 Preparing for Syncing. 3.1 Tools and Equipment Needed; 4 Step-by-Step Guide to Sync Hayward Pool Lights. 4.1 Resetting the Pool Lights; 5 Troubleshooting Common Issues. 5.1 Light Not Responding to Remote; 5.2 Flickering or Dim Lights; 6 Conclusion; 7 Frequently Asked Questions. Investigated a bit more last evening. There are 2 junction boxes, for pool and spa and both appear to be 120V lights. In the spa function box, the pool lights are wired together with the spa light. From this box, the wires go out to the GFCI breaker and then 2 grey, 1 black and 1 white coming into a single relay.