Hikvision I Frame Interval Setting

Recommended I-frame interval settings for Hikvision and their OEMs. The I-frame interval value is recommended to be 50. However, you can try 30 or even 60 and see if you're okay with the picture. Recommended I-frame interval settings for Dahua and their OEMs is 60. You can try higher as well to check if you notice any difference.. The simplest way to look at these are, lower I-Frame interval (closer to 1 in your GUI for example), the more frequent the I-Frames and the higher the image quality (subjective to some BUT is a fact) but you also increase bandwidth requirements. Higher the I-Frame interval (further away from 1 for example), lower the frequency of I-Frames and.

Do you see anything wrong with 10fps and 100 frame interval? 640480 (4:3) resolution ? with recording on motion detect.I played with various resolutions and like 640480 the most.. With 10 fps and a 100 frame iframe, you could potentially have 10 seconds of digital noise in the video if something happens to the video stream during the first few frames (after the last iframe is sent).. Reducing the I-frame interval (25 frames, 10 frames, etc.) will obviously increase the bitrate/bandwidth used by the camera and is only really recommended if you are installing the camera in a very busy scene where having the full image refresh more regularly can improve image detail. Increasing the I-frame interval (75 frames, 100 frames.