Partial reset: hold [SPCH] button and turn the radio on. • IC-2710H - Hold both [S.MW] buttons and turn the radio on. • IC-2800H - Full reset: hold 3rd buttons from the top on both sides of the LCD display and turn the radio on. Partial reset: hold 2nd buttons from the top on both sides of the LCD display and turn the radio on.. Icom CAT and Digi-Mode Interface Guide First of all, thank you for purchasing my Icom CAT and Digimode Interface Cable. Hopefully, this guide will allow you to get your PC connected to your Icom Radio with the minimum of effort. Your Interface comes with a full 12 Month warrantee against material failure.
![ICV80 [56/64] Resetting](https://mcgrp.ru/views2/1074095/page56/bg38.png "ICV80 [56/64] Resetting")
2.3. Plug the USB flash drive into the ICOM NEXT. 3. Perform following procedure with ICOM NEXT: 3.1. Press and hold the button pressed on the ICOM Next and connect the ICOM NEXT to the power (i.e. OBD II jack of a vehicle). The ICOM NEXT starts with all LEDs glowing red. The LEDs stay red; some may flicker orange/yellow. 3.2. Keep the button.. Make sure you always use the latest file for the factory reset. Fix: Perform the following steps: 1.Copy the "ICOM_Restore.bin" file to the USB flash drive 2.Disconnect the network cable from ICOM A 3.If ICOM A is placed in an OBD II jack of the vehicle, then pull it out (ICOM A must have status off") 4.Connect the USB flash drive to ICOM A