How to Reset a KitchenAid Refrigerator Over Temperature Alarm; How to Replace Filter in a KitchenAid Refrigerator. Model 1: EDR2RXD1; Model 2: EDR4RXD1; Model 3: EDR1RXD1; Model 4: EDR3RXD1; Model 5: EDR5RXD1; How to Reset Water Filter in a KitchenAid Refrigerator; KitchenAid Refrigerator Control Board Reset; How to Reset the Temperature of a.. We have a KitchenAid side by side built -in frig. KSSS42QKX01. The Over Temperature alarm started beeping which led to finding the temperature in the refrigerator had raised to 50 degrees.. But you can always try to turn the circuit breaker off for 5 minutes to the refrigerator to see if the electronics will reset. Sometimes, that will work.
If the over-temperature condition is still present when an Over-Temp reset is performed, the indicator light will continue to reactivate every 4 hours until the refrigerator temperature is below the preset range. NOTE: These features will not appear on your control unless your refrigerator is above preset range and the alarm requires a reset.. Unplug the fridge from the outlet, then open the door and turn the temperature control to 0 or off. Wait a few minutes, then plug the fridge back in and reset the temperature control. It will take a few minutes for the compressor to reset. 10. Reset to Factory Settings. Go to the control panel and push the options button.