The air filter behind your GE Profile ™ Opal 2.0 Ultra should be checked and cleaned at least every 2 months. Using your Opal with a dirty filter can affect the ice maker's performance.. Dirt, dust, and lint can clog the condenser and reduce the performance of your Opal. Cleaning Support For information about cleaning the interior and.. Cleaning Instructions for the GE Opal 2.0 Ice Maker; Preparation for cleaning. Before starting the cleaning process, make sure to unplug the ice maker and allow it to thaw completely if there is any ice build-up. Gather cleaning supplies such as mild detergent, warm water, a soft cloth, and a toothbrush for hard-to-reach areas. Cleaning the.
To clean your Opal 2.0 Ice Maker, you will need a few essential tools and materials. Here is a list to help you prepare: Soft Cloth or Sponge: Use a soft cloth or sponge to wipe down surfaces without scratching them. Measuring Cup: A measuring cup helps to measure cleaning solutions accurately.. Cleaning the Rear Filter (GE Profile™ Opal 2.0 Ultra Models Only) Remove the filter attached to the back panel of the unit by pulling it out gently by the filter handle. Clean the filter with warm, soapy water. Do not place the filter in the dishwasher. Rinse and let the filter dry before putting it back in place.