PAGE 1. Schwintek In-Wall™ Slideout System TROUBLESHOOTING GUIDE Rev: 01.30. PAGE 2. TABLE OF CONTENTS SYSTEM INOPERATIVE 3 Controller 3 Motors and Harnesses 4 ROOM STUCK OUT (RETAIL) 5 Electronic Manual Override 5 Disengage Motors, Manually Retract Room and Travel Lock ROOM STUCK IN (DEALER ONLY) 7 Electronic Manual Override 7 Remove Exterior Fascia to Access Motor Retention Screw VISUAL.. Parking locations should be clear of obstructions that may cause damage when the slide-out room is actuated. 2. Be sure all persons are clear of the coach prior to the slide-out room actuation. 3. Keep hands and other body parts away from slide-out mechanisms during actuation. 4. To optimize slide-out actuation, park coach on solid and level.
The Schwintek In-Wall™™ Slide requires a minimum of 30 amp fuse. Check the 12 volt fuse box for blown fuses, and replace any if necessary. Consult the rv manufacturers documentation for the location of the 12 volt fuse box, and the location of the Room Slide Controller's fuse. If the fuse blows. Schwintek In-Wall Slide-out Inverted Rebuild Kit for TSB 146-001-2022 Schwintek In-Wall Slide-out Manual Override Motor Disengagement Schwintek In-Wall Slide-out Motor Replacement