Shimano uses a special connecting pin that has a break-away guide that comes with the chain. This is what you'll use to connect the chain, once it is threaded on the chainring and the derailleur. Use your chain break tool to cut the chain and then proceed to properly thread your chain through your derailleurs.. How to Use a Chain Tool To Break a Chain How to Loosen a Stiff Chain Link In this tutorial, we will learn how to remove and install a connecting pin on a Shimano HG or IG chain. These type of chains always require a special replacement pin that has larger peens. Tools For this job you will need a Shimano compatible chain tool such as the Park CT-3, and a set of pliers for breaking the.
If your chain uses a Shimano pin system and doesn't have a quick link, use the chain breaker tool to remove any one of pins to disconnect the chain. If you replacing a worn out chain, it might be time for a new cassette and chainring as well.. For installation to the bicycle, and maintenance: • Only use the tool and QUICK-LINK models specified in the table to connect the chain. If an unsuitable QUICK-LINK or tool is used to connect the chain, insuficient connecting force may cause chain separation or skipping.