(PDF) Trane Installation Manual Split System (R410A) 16 SEER

Trane believes that responsible refrigerant practices are important to the environment, our customers, and the air conditioning industry. All technicians who. This manual describes proper installation, operation, and maintenance procedures for air-cooled systems. By carefully reviewing the information within this. Read this manual carefully before attempting to install, operate, or perform maintenance on this unit. Installation and maintenance should be performed by qualified service technicians only. This unit is listed by Underwriters Laboratory. Packaged units are designed for outdoor mounting

These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with .. Installation and Operation Manual. Table of Contents. Section 1. Safety. X2 is necessary if not using select Trane or American Standard thermostats. 5. For single speed operation, use Y1out and cap off Y2 out.. 3.1 Prepare The Unit For Installation STEP 1 - Check for damage and report promptly to the carrier any damage found to the unit. STEP 2 - To remove the unit from the pallet, remove tabs by cutting with a sharp tool. Section 4. Setting the Unit 4.1 Pad Installation When installing the unit on a support pad, such as a concrete slab, consider the.